4
5
MSI-GA221C(IM)150813_Layout 1 8/15/13 12:56 PM Page 3
4
SAVE THESE INSTRUCTIONS
1. Unpack the appliance and place Motor unit on a horizontal surface.
2. Immerse the jar, jar lid and meas uring cup in warm soapy water and
rinse them and dry. Never immerse motor unit in water for cleaning to
prevent the risk of electric shock.
Caution: The blade is very sharp, please handle carefully.
3. The correct assembly way will be
described in detail in below sections.
Before assembling the jar, be sure the
power cord is unplugged from the power
outlet and the speed selector is on the OFF
position.
The blender jar is suitable for making mixture
which the juice and pulp are mixed.
For attaching jar, firstly place the jar lid into the
jar and rotate the jar lid until it is locked into the
groove of the handle tightly (see Fig.1), then
the jar lid is placed tightly and properly with the
jar. And then place the jar into the motor unit
properly and turns the jar in clockwise until it
locks in place (see Fig.2).
Note: Make sure all the assemb ly is placed properly.
BLENDING FRUIT AND VEGETABLE
1. Before assemble or attach the power cord into the outlet, make sure the
speed selector is in the OFF position.
2. Peel or core the fruit or vegetables and then cut it into small dices, put
the food pieces into the jar. Usually certain amount of purified water has
to be added to facilitate the smooth running of appliance. The proportion
of the food and water is 2:3.The amount of mixture should not exceed
the max level as indicated on the jar
Note:
Never use boiling liquids or run the appliance empty. The jar can
be used for crushing ice.
3. Place the jar lid in position according to the operation mentioned above
(see Fig.1). And then the safety protection device starts to function.
4. Turn the speed selector to the desired setting. The 1 setting is the
lowest speed and the 2 setting is the highest speed. Repeat to turn
switch to Pulse position and then release it to return the OFF position to
achieve best ice-crush result.
5. You may add ingredients into the jar through the center opening of jar lid
during operation, and then replace measuring cup if necessary. You just
need to press down the measuring cup directly to fix it tightly.
6. The max operation time per time shall less than 3 minutes. Minimum 10
minutes rest time must be maintained between continuous two cycles.
7. Turn the Speed control knob to OFF position once the mixture has been
blended to your desired consistency.
8. Remove the jar from the motor unit (rotate the jar anticlockwise and then
remove it), carefully take off the jar lid, then pour and serve.
KNOW YOUR BLENDER
