CARE AND CLEANING
7
Note: Ensure appliance is disconnected from power supply before detaching the
Air Filter Protective Screen.
CLEANING THE WET PAD
• Power off the appliance and disconnect from power supply. Detach the wet pad and clean
using a neutral detergent and brush and then rinse with clean water. Allow to dry before
assembly.
Attention: the wet pad must be installed horizontally to avoid leaking.
CLEANING THE WATER TANK
• Power off the appliance and disconnect from power supply. Remove the drainage plug
and allow water to discharge. Detach the shelf and paper evaporator. Use a brush and
neutral detergent to clean the water tank. Rinse completely with clean water before
assembly.
CLEANING THE EXTERIOR
• Use a clean soft cloth with neutral detergent.
WARNING: Power off appliance before cleaning the exterior as there may be high
pressure inside the body.
HINTS ON DISPOSAL
According to the European waste regulation 2012/19/EU this symbol on the
this product or on its packaging indicates that household waste. Instead it
should be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of
correctly,you will help prevent potential negative consequences for the
environment and health,which could otherwise be caused by inappropriate waste handling
of this product.
For more detailed information about recycling of this product,please contact your local
council or your household waste disposal service.
• 3-way adjustable fan speed and side-to-side fan oscillation.
• Cooling via air evaporating by temperature reduction.
• Wide angle automatic swing & manual swing to fix wind direction up and down.
6
PRODUCT FEATURES
ASSEMBLING CASTORS
• Place appliance on a flat surface & assemble the castors.
IMPORTANT NOTES ON THE WATER TANK:
• Pay attention to the water level inside the water tank.
• During operation, always ensure that the water tank level does NOT exceed the MAX
level. Similarly, water tank level should not fall below the MIN level when humidifying.
• Insert ice or frozen ice box to the upper water tank to increase cooling efficiency.
CAUTION: Ensure water tank level does not exceed the MAX level.
OPERATION AND FUNCTIONS
• ON/OFF on control panel : Press the key once to power on appliance. Press the key twice
to power off.
• Speed: press this key to operate the appliance. Select fan speed to each corresponding
key press: LOW - MEDIUM - HIGH - LOW.
NOTE: Pay attention to the indications on the display.
• Swing: Press once to alternate wind direction (swing indicator light will illuminate). Press
twice to cancel this function.
NOTE: Manually fix the swing direction by adjusting the blades for up or down wind
direction.
• Cooling: press the key to begin cooling. Press again to cancel this function.
IMPORTANT: Ensure there is sufficient water in the water tank before selecting the
cooling function.
USING THE ICE BOX FEATURE
• The Ice Box feature helps keep the environment cooler by absorbing heat from water and
allowing water temperature in the water tank to fall below ambient temperature, so air
delivered will be much cooler.
• Add water to the ice box (not full) and insert into your refrigerator’s freezer to form ice.
• Once ice has formed, open the door, put the frozen ice box into the water tank.
• There are two ice boxes for alternating this feature.
OPERATING INSTRUCTIONS
