cod.W010006
Pag. 16
01/08/2019
15.
PROCEDURE FOR ENTERING THE MAIN MENU
To access the main menu, where all parameters are located, just press the keys indicated in the figure (by-
pass button and empty tank) simultaneously for a few seconds until the display shows
“Ready Blr Temp”
.
At this point you can change all parameters in the menu following the instructions below:
To move to the NEXT parameters press the
“bypass ”
button, to
go BACK press the
"cycle III"
button.
To INCREASE the value of the parameter,
press the “
cycle II
”, button, to DECREASE the
value of the parameter, press the
“
cycle I "
button.
To CONFIRM ( OK! ) the value after changing
the parameter, press “
empty tank
”.
To exit the parameters menu, press keys
“
by-pass and empty tank
"
at
the same time
S t an db y T i mer
1 0 min
+
_
