Moretti MOPEDIA RP770, Instruction Manual

Page: 16 / 20

16
ENGLISH ENGLISH
8.6 RP770
1. Position the handles in the same attachment point of the toilet seat;
2. Reposition the tablet and screw;
3. Adjust the height of the legs. Press the stop, slide the tube bringing it to the desired height.
Release the stop, check the stability of the product and check if all legs are the same height.
9. BEFORE USE
• Check if the frame is damaged in order to guarantee a safe use for people and things.
• Check the correct assembly of the device.
10. CAUTIONS FOR USE
The manufacturer and distributor are not responsible for any responsibility for the
consequences of improper use of the product.
• Always help the patient with walking difficulties to position themselves on the seat.
• Do not use with patients who exceed the maximum weight shown on the label placed on
the product frame.
• Avoid sudden movements during positioning.
• Be careful on wet floors, on wet or slippery surfaces, it could make difficult the patient
positioning.
• Do not store the product outside. Periodically check the stability of the product and the
correct fastening screws and the status of protections rubber.
• In case of doubt for the use, the adjustment or the maintenance of the product, please
contact your dealer.
WARNING!
Do not exceed the maximum load capacity for any reason!
11. HOW TO USE
11.1 RS825-RS826
Height adjustment
Remove the 4 clips. Adjust the height of the 4 legs (RS826) or wheels (RS825) according to
your own need. Reposition the 4 clips in the corresponding holes to lock the legs (RS826) or
wheels (RS825) at the selected height. Make sure the pin has completely penetrated the hole.
11.2 RS827-9-31-33-38-39
Height adjustment
Press the stop to adjust the seat by removing the barrel and bringing it into correspondence
of the holes according to the desired height and the subjective manoeuvrability of the patient
himself. Reposition the pin on the hole to lock the barrel. Check that all four legs have the
same height. Place the seat on a flat and regular surface. To check seat stability before use.
11.3 RS908
Press the pin to remove the barrel and bring it into correspondence of the holes according to
the desired height. Reposition the retainer on the hole to lock the barrel. Check that all four
legs have the same height.
11.4 RP770
Press the pin to remove the barrel and bring it into correspondence of the holes according
to the desired height. Reposition the retainer on the hole to lock the barrel. Check that both
legs have the same height.