23
ENGLISH
• Always place the pump unit on a flat, stable surface before use. If placed on an inclined
surface, the unit may not work properly;
• Do not cover the unit during operation; use the power indicated on the back label
of the compressor only;
• Do not use a damaged power cord;
• Unplug the unit and contact qualified personnel if any of the below conditions will occur:
- damaged power cord or plug;
- liquid has entered in the unit;
- the external case has been damaged;
- the unit is not working properly, it operates continuously, it works in a noisy
way or with low performance;
• Always turn off the unit before deflating the garments;
CAUTION!
• If during use you feel ill or have pain, do not use the equipment.
Please immediately stop using.
• When wearing the garments does not move and/or walk.
• Do not use the garments directly on the skin. Wear comfortable dress under
the garments.
7. SYMBOLS USED
REF
Code
EC
REP
0197
S N
Warning
Temperature Limitation
EC
REP
0197
S N
BF Type
Follow instructions for use
Class II equipment
Date of production
EC
REP
0197
S N
Disposal of the product by the European Directive
EC/96/2002
ON
OFF
EC
REP
0197
S N
Manufacturer
LOT
Lot
IP22
-
Protection against solid objects greate
than 12 mm
- Water drops Protection inclined up to 15°
8. COMPRESSION THERAPY SYSTEM PARTS
Component part
Description
LTM560
4-OUTLET PUMP
LTM563-S
SLEEVE SIZE - S/M (70X25 CM)
LTM563-L
SLEEVE SIZE L/XL (90X25CM)
LTM566-S
BOOT SIZE - S/M (90X30CM)
LTM566-L
BOOT SIZE - L/XL (110X30 CM)
LTM568
EXTENSION ONLY FOR BOOT L/XL (100X10 CM)
LTM569
ABDOMINAL BAND (120X 40 CM)
9. GENERAL DESCRIPTION
The garments sections are partially overlapping to eliminate any opening between the cells
and reduce the possibility of stagnant liquids. The sections inflate and deflate sequentially with
the possibility of excluding some chambers. The compression begins from the section the most
distant from the heart and moves towards the closest section to help the drainage of the blood.
The system pressure and the timer for the treatment can be adjusted using the controls on the
display of the unit. Using the buttons on the display you can select two compression mode A or
B depending on the treatment required.
Mode A
The compression starts from the end part of the limb and goes to the heart. Once a section
