Moretti Andea Mobility Taurus, Instruction Manual

Page: 41 / 79

15
ENGLISH
6. Detach the battery Velcro attachment strap.
7. Lift the two batteries, then extract them upwards
8. At this point, your disassembled wheelchair will look
as shown in the figure below
13. USING THE ELECTRIC WHEELCHAIR
Before you get into your electric wheelchair, make sure you are on a flat surface with no
obstacles. Although your wheelchair is designed for use on slopes, it is safer to practise using
it on a flat surface. Several checks to make before every use are indicated below:
• Check correct functioning of the batteries and charge them if necessary
• Always check correct and stable assembly of all the parts of your electrical wheelchair
• Always check the state of wear and tear and functioning of the parts, in order to guarantee
that the device is used in total safety; in particular, check the state of wear and tear,
damage to and pressure of the front and rear tyres
• Check functioning of the horn.
• The motor unlocking lever must be in position D (DRIVE).
• It is recommended to select a low speed for the first few times you use it.