Dear Customer,
Thank you for choosing Morel's SoundWall
TM
in-wall speaker!
These handcrafted speakers are uniquely designed and constructed, to offer extraordinary sound quality for both stereo
and home theatre applications. When properly installed the SoundWall
TM
speakers will transform your musical and
cinematic experiences into true magic for your long lasting enjoyment.
The information in this manual will help you get the best possible performance out of your speakers. If you have any
questions, please contact your Morel dealer, or Morel Support at
www.morelhifi.com
.
Introduction
Speaker placement
The position of the speakers has a great effect on the quality of the sound and soundstage created. Here are some
recommended guidelines that will assist you in the speaker placement process.
The Morel SoundWall
TM
speakers are designed to work well in both small and large rooms.
Regardless of the application you may require it is recommended to make sure there are no objects that may block
the area between the listener and the speakers.
Before installing the speakers consider the proximity to the electricity and other fixtures.
Recommended speaker placement for stereo application
Installation preparation
Insulating the Wall Cavity
To achieve the very best from your loudspeakers we recommend you fill the wall cavity behind the speakers with
fibre-glass insulation / Rockwall. It is important to try and keep the same amount of insulation material for each
speaker to receive a true consistent bass response.
Install insulation also in the bays adjacent to the speaker location to reduce the noise produced by unsupported
drywall. If in doubt, please consult your dealer / installer.
Back Box
Morel's SoundWall
TM
speakers infinite baffle design allows you to place them in the wall cavity without the need
for an enclosure. Nonetheless, in order to reduce sound transmission to other rooms it is recommended to use a
back box / enclosure.
Here are Morel's recommended ideal enclosure sizes for the SoundWall
TM
series:
Recommended speaker placement for home theatre
Place the speaker on either
sides of the flat panel
screen
1
The speaker should be centered to
the flat panel screen
2
Ideally
:
x
x
x
x
x
The listener
2
Min.
50mm
Flat panel screen
2
4
3
*
If additional speakers are desired - they should be placed at the same height as the main frontal
speakers (if positioned on the side walls)
Aim to set the speaker as close as possible
to this diagram for optimal performance
The tweeter should be at ear level
The distance between the speakers is
2
/
3
the distance from the listener
3
2
1
Preferably place the centre speaker
under the flat panel screen
4
The distance between the
edge of the flat panel screen
and the speaker should be
minimum 50mm
3
H5", M5"
&
X5" 9 liters (0.317 cubic feet)
H6", M6"
&
X6"
13 liters (0.459 cubic feet)
H8"
&
M8" 24 liters (0.847 cubic feet)
