manualshive.com logo in svg

Morel SoundStand ST-95, Owner'S Manual & Installation Instructions

Share
Download
Morel SoundStand ST-95 Owner'S Manual & Installation Instructions Download Page 14

Speaker Placement

In designing the subwoofer, we have made every effort to
make it unobtrusive in the environment, by its slim cabinet
design. Unlike surround or stereo speakers, which must be
placed to project directly to the listeners' ears, the subwoofer
moves all the air in the room and can be placed wherever
convenient. The subwoofer can even be hidden behind the
TV stand or next to any furniture.

Thank you for choosing Morel's SoundSub

TM

 Subwoofer.

The SoundSub

TM

 RS-91A, RS10A and IS-9A are active

subwoofers (IS-9A is built of two 9" woofers), driven by a high-
quality amplifier that is AC-3 compatible. Designed to augment
the SoundSpot

TM

 satellite speakers in the low bass frequency

range, the SoundSub

TM

 will enhance any home theater system

with a well-controlled, accurate bass.

Connecting The SoundSub

TM

1.1 Main Power switch

The new amplifier will have its main breaker switch at the bottom
left corner, next to the power cord inlet. It consists of an ON/OFF
switch.
The main power switch has to be in the ON position in-order for
the unit to become operational.

1.2 Auto power switch

In the upper left there is a power switch. If AUTO position is
selected, the sub will become operational as soon as the
SoundSub

TM

 will receive an audio signal. It will be turned off

several minutes after the audio signal is switched off.
 At the ON position the SoundSub

TM

 will become operational

indefinitely, or until the AUTO position is selected.

Summary of Contents for SoundStand ST-95























Reviews:

No comments

Brands by name

Popular brands

Load more brands