Connecting Speakers
Specifications
Content
Installation Requires
Attach the speakers to the brackets, lightly screw the
bracket knobs into the cabinet and Point the speaker
toward the listening area. Once the direction of the
speaker has been determined tighten the bracket knobs
securely.
Using the bracket supplied, first make location and
placement and then mount the bracket.
For safety
reasons do not mount a speaker on a wall made of
unreinforced drywall or plasterboard.
If you are not
sure consult a professional installer.
X4
X4
X4
X2
X2
Mounting Speakers
Please note:
These weather resistant speakers are manufactured to
resist a variety of weather conditions with UV paint
protection, stainless steel grills, and aluminium
brace.These speakers are not waterproof and cannot
submerged under water
Woofer:
4.5"(115mm) Ferrite
magnet system.
Tweeter:
0.7" (20mm) soft
dome.
Powerful Neodymium magnet
system.
Ferrofluid damped and cooled.
Finish
Drive Units
Frequency Response
Construction
Nominal Impedance
Power Handling
Peak Power Handling
Sensitivity 1 W/1 M
Crossover Point
Dimension(W x H x D)
Weight
Bass reflex with port
65-20,000Hz
4 Ohm
30W
60W
90 dB
4000 Hz / 12 dB octave
6.7” X 9.8” X 6.1”
(172mm X 250mm X 155mm)
1.84 KG
White sanded finish
Morel operates a product design improvement policy consequently specifications are
subject to alterations without prior notice
