6
Fig. 2 - Display appliance off (OFF)
Water temperature adjustment
The target water temperature can be set between 37 and 60°C.
Depending upon the incoming cold water temperature and flow
restrictors fitted to hot water outlets, this temperature may not
always be achieved.
Turn the ignition knob clockwise to increase the temperature and
counter-clockwise to decrease it. The symbol
flashes and the
display shows the new target temperature set for 5 seconds.
Switching the appliance off
Hold down for about 5 seconds the water heater power off
button .
As soon as the symbols
start flashing, release the button
The appliance will be in the OFF state and the display shows
the symbols
. (Fig. 2)
Fig 3 – Display of Appliance during operation
If the water heater is to be left unattended for any period,
drain down the water heater (see Winterisation section),
remove the mains plug from the socket, or isolate the fuse
spur, and shut off the gas supply.
