20
© 2013 Maka Technologies Group. All Rights Reserved.
Getting Started
Installation of your QB6 HD Digital Roadcorder
TM
Installation
1
Fixing both cameras to the window mounts
It is compulsory for both the front and rear window mounts to be fixed up before
using the device in a car. Make sure that you place the recorder in an
appropriate place, so as not to obstruct the driver’s view.
2
Connecting charger to the cigarette lighter
Connect only the
manufacturer-approved charger supplied with your device.
Use only Maka GPS Technologies Group-approved charger specifically
designed for your device. Incompatible charger can cause serious injuries or
damage to your device.
3
Connecting both cameras
Connect the front and rear cameras with the AV cable given in the
package.
Plug in one of the AV cable jacks to the Rear Camera AV Input port on
the Front Camera.
Plug in the other side of the AV cable jet to the Rear Camera AV Output
port
4
Securing the power cord
Use cable clips to secure the power cord so that it does not interfere while
driving. To ensure the highest quality recording, you are advised to place the
car DVR near the rear view mirror.
