Mopedia RP675, Instruction Manual

Page: 17 / 36

5
ENGLISH
• Do not hanging anything on the rollator frame to avoid distortions of the tubes
when the rollator is open and damage the stability. Injury may also be caused by distortions;
• Take care to entrapment of fingers and / or clothing during the opening and closing.
6. SYMBOLS
Product code
Unique Device Identification
CE mark
EC REP
0197
S N
Manufacturer
Batch Lot
Read the instruction manual
Medical Device
Conditions of disposal
7. BEFORE USE
Before using the device, always check:
1. That all parts of the rollator are locked in a secure manner;
2. Check that all screws are tight;
3. Make sure that the seat is properly locked
(if that ‘not press further with the power seat bottom frame);
4. Check that the locking of the seat is correctly inserted;
5. Check the correct operation of the brake and the regular brake.
8. ASSEMBLING INSTRUCTION
8.1 Before assembling the product
Unpack the product and check that no damage has occurred during shipping. In the event when the
rollator is damaged, please contact your nearest dealer.
9. ASSEMBLY
9.1 Open the rollator
Open the rollator pulling the front part of the frame by leveraging on the legs
9.2 Folding the rollator
Make lever on the lateral bars and bring back the front of the rollator.
9.3 Handles assembly
Place the handle tubes in the frame. Turn the locking knobs until they are locked. The hexagonal
hole is needed to accommodate the screw head.
9.4 Adjustment of the handles
Adjust the height of the handles using the side knobs. Unscrew the knob, place the handles to the
desired height, turn the knob clockwise to tighten and fasten it again. Repeat for the other handle
and make sure that both handles are positioned at the same height.