Mopar Navus, Owner'S Manual

Page: 55 / 76

49
C
USTOMIZING
Y
OUR
N
AVUS
> C
USTOMIZING THE
O
VERALL
S
ETUP
General Tab
Units : Allows you to measure distance in miles ( Statute ) or
kilometers ( Metric ). If you select Statute , speed is shown in miles
per hour and elevation is shown in feet. Metric shows speed in
kilometers per hour and elevation in meters. Note: If you change
your Data Tabs (page 45 ) to show Elevation, Feet or Elevation,
Meter , these settings still appear despite your Units setting.
Voice : This setting determines when the Navus “speaks.”
Guidance and Status : The unit speaks guidance and status
messages during route navigation. Guidance messages include
such route navigation
messages as “drive point eight
miles west, then turn right.”
Status messages include
phrases such as “lost satellite
reception.”
Route Guidance : The unit speaks guidance messages during
route navigation, as described above. It does not give status
messages.
SPEAK Key Only : The unit only speaks when the SPEAK key is
pressed (it does not talk otherwise).
Attention Tone : Determines whether the voice prompts are preceded
by a chime. This is turned on by default.
Power-Off Clock : In some vehicles, a clock appears on the Navus
screen when you turn off the unit. If you do not want the clock to
appear, set this to Off .
Touchscreen Tone : Allows you to turn the touchscreen click sounds
On or Off .
Keypress Tone : Allows you to turn the keypress beeper sounds On
or Off . A beep confirms that a key (such as MENU , FIND , SPEAK )
on the unit has been pressed.