2
CAUTION: Do not let tensioner arm snap back to the
freearm position, severe damage may occur to the ten
sioner.
1.
Disconnect negative battery cable from battery.
2.
Raise vehicle.
3.
Remove right front wheel.
4.
Remove the inner splash shield.
5.
Rotate belt tensioner (8) until it contacts its stop. Re
move the belt (7), then slowly rotate the tensioner into
the freearm position .
6.
Lower the vehicle.
7.
Open the hood.
8.
Partially drain the cooling system below the upper ra
diator hose.
9.
Remove the engine cover.
10. Disconnect the fresh air makeup hose (4) from the air
cleaner body (1).
11. Remove the push pin (3).
12. Remove two bolts (2) from the air cleaner body (1).
13. Loosen the clamp (5) at the resonator and remove the
air cleaner body (1).
14. Remove windshield washer reservoir (1).
15. Disconnect radiator fan electrical connectors.
16. Remove the wiring harness from the lower fan.
17. Remove the four mounting bolts (4) from the radiator
fan (3) assembly.
18. Remove radiator fan assembly from the core shroud
(2).
Mar 18, 2011
K6861276
