16
CAUTION: Do not use acid core solder.
73. Using a solder tool (3), solder the connection (2) to
gether with rosin core solder (1).
74. Center the heat shrink tubing (2) over the solder joint
and heat using a heat gun. Heat the joint until the tub
ing is tightly sealed and sealant (1) comes out of both
ends of the tubing.
75. Crimp/splice the backup camera ground wire (BK) to
the ground (BK) of the 12V ignition power outlet wiring
harness connector as above.
Jun 30, 2011
K6861197
