13
88. Install the instrument panel center bezel (1) onto the
instrument panel and fully engage the retainer clips.
89. Install the two lower screws (2).
90. If necessary, install the close out panel (2) and install
the screws (3).
91. Position the cup holder (2) onto the clips (1) and seat
fully.
92. Install the screws (2).
93. Position the bezel and seat the clips fully.
94. Connect the negative battery cable.
SDARS VEHICLE CONFIGURATION
Vehicle VIN must be updated with the sales code of the added accessory in order to enable system functionality.Using
the DealerCONNECT website and a scantool, complete the procedure below.
• Log on to Http://dealerconnect.chrysler.com.
• In the "Vehicle Options" screen under the "Global Claims System" category in the "Service tab, enter the vehicle VIN
and add the sales code
RSC (SIRIUS SATELLITE RADIO)
as a "Dealer Installed option".
• Con
fi
rm the new sales code has been successfully added to the VIN.
With the ScanTool connected to both the internet (via Ethernet port or wireless connection) and the vehicle, follow the
steps below:
• In the "Initial Start Up" screen select
VEHICLE PREPARATION
• Toggle down and highlight
RESTORE VEHICLE CONFIGURATION
• Press
START
• Press
NEXT
• If necessary, select proper vehicle line and model year and press
NEXT
• Con
fi
rm correct selection and press
NEXT
• Enter vehicle VIN using the on screen keyboard or con
fi
rm that the Auto Filled VIN plate is correct and press
NEXT
• Press
OK
• Enter the user ID, password and dealer code using the one screen keyboard and press
OK
NOTE: At this point the ScanTool is downloading the vehicle con guration from the network.
4/1/2008
K6860274 Rev. 1
