TROUBLESHOOTING
－
The ambient temperature is too low.
Ice cube is too small
Ambient temperature is too high or the water temperature is too high.
Strange noise
When the cooling system is working, the freezing medium flowing in the tube will make noise.
When the cooling system is working, the fan will make noise.
When the water box arrives at the deice place, turning on/off the solenoid valve may make noise.
When the water is injected into the inner box, the pump will make noise.
All these noise are normal.
8
The indicator light is not
on and there is no sound
when pressing the button
keys
The adding water
indicator light is on while
there is still water left in
the storage area
There is no ice in or little
ice in the ice storage area
while the ice full indicator
light is on
1.The ice-making mode is
not on
2. The amount of water
below the minimum
water level
3. The outlet of water
storage area is blocked
4. Pure or distilled water is
injected
1. Turn on ice making mode
2. Add water according to
the water injection
instructions
3. Remove foreign matter
from outlet of water
storage area
4. Add a little salt to purified
water or distilled water
1.Place in a suitable
environment
2.Remove ice shelved or
automatically recover
after ice melts naturally
1.The power plug is not
properly plugged in
2. Power failure
1. The drain nut is not
tightened
2. The drain plug is not
plugged
1. The ambient tempera-
ture of the place is
lower than 37°F
2. Ice on the temperature
sensor
1. Tighten the nut
2. Plug the plug and tighten
the nut
Water leakage
1. Plug into a power outlet
2. Check for power failure
Problem
Possible cause
Potential solutions
