MOOSE ZXLED12, How To Use Manual

Page: 20 / 64

20
Trouble Conditions
When your system detects a trouble condition, the LED Control Station
lights the TROUBLE light.
Silencing Trouble
To silence the trouble sounder:
1. Press .
2. Enter passcode: .
Identifying Trouble Conditions
After you silence the trouble sounder, the trouble light will remain ON.
To view which zone(s) caused the zone condition, press the View Info
key (Key #1). The zone(s) that caused the condition will light steadily.
Bypassed zone(s) will flash.
To identify the cause of a system trouble, press the View Info key (Key
#1) a second time. The following diagram displays the type of trouble
for each light that is illuminated.
If a trouble condition light does not turn OFF, contact
your Security Company Representative.
TROUBLE CONDITIONS
OFF
CANCEL
NOTE
READY
TROUBLE
FIRE
1
2 3 4
5 6 7 8
11 12 10 9
Panel Low Battery
AC Failure
Memory Error
Communication
Failure
Phone Line Failure
Bell Fault
RF Jamming Call RPM Failure
Missing Keypad