MOOSE Z900, User Manual

Page: 13 / 51

1.4 Alarm Conditions
What To Do If An Alarm Occurs
Whenever an alarm occurs, the ALARM indicator will light, the audible alarm will
sound (if applicable), and the control will communicate with the Central Station
(if this option was purchased).
WARNING
IF UPON RETURNING TO THE PREMISES, IT IS DISCOVERED THAT AN
ALARM HAS OCCURRED, DO NOT ENTER THE PREMISES. GO TO THE
NEAREST TELEPHONE AND CONTACT THE APPROPRIATE
AUTHORITIES.
To reset the alarm:
1. Enter your User Code to reset the alarm.
2. The ALARM indicator will remain lit.
If the alarm was activated through one of the "hardwire" zones, the corre-
sponding ZONE indicator(s) will also be lit, identifying the specific area that was
violated. If the alarm was activated manually by pressing one of the keys, no
zone indicators will be lit. Press the Reset (*) key to extinguish the ALARM
indicator after determining the type of alarm that occurred and area of protection
involved.
A history of the alarm condition will be stored in the control's memory and may
be recalled at any time. See "Special Features" for more information.
False Alarms
If for any reason a false alarm occurs, perform the following steps:
1. Enter your User Code. The armed light should turn off.
2.
Notify the appropriate authorities of the alarm immediately.
3. Press the Reset (*) key to extinguish the ALARM light.