STEP 3
UPDATED AS OF: 09/14/2021
5 of 7
With caps removed, attach the wall mounts with necessary hardware as required for
installation. Do not screw any of the mounts so tightly that they are unable to slide.
After installation slide all mounts outward so that each screw is at inside edge of slot.
Screws should be tight enough to hold all mounts in place.
STEP 4
Masonry Wall
1/4” Predrill
Masonry Wall
1/4” Predrill
Masonry Wall
1/4” Predrill
E
Drywall
1/4” Predrill
Stud Wall
1/8” Predrill
C
B
D
Drywall
Stud Wall
Top
Bottom
Left
Right
Adhesive Pad
Centerline
Place adhesive pads along backside of board. Use two pads per board equally spaced
along the center. For 6’ and 8’ long boards installed vertically, space pads along the
long axis. If installing tray continue to next page otherwise skip to Step 5.
