750D Evolution
Series
Front Panel Controls
Figure 1: MOON 750D Front panel
The front panel will look similar to Figure 1 (above). The large digital display window indicates the track number of
the compact disc currently playing (or the total number of tracks in stop mode) and corresponding time
information.
The “Standby” button disengages the transport
mechanism from the rest of the
750D’s
circuitry and
turns off the digital display. However, when in
“Standby” mode, all digital and analog audio circuitry
remains powered up to help maintain optimal
performance. The blue pilot LED centrally located above
the display window will no longer be illuminated when
the player is in “Standby” mode.
The “Program” button allows you to program a
selection of tracks in the order that you wish to listen
them. After loading a compact disc into the
750D
, select
the first track you wish to listen to, using the
or
buttons and then press “Program”. To program a
second track, select it the same way you did for the first
one and press “Program” again. Repeat this operation
as many times as you want to program tracks to a
maximum of 30 tracks. Once you’ve completed
programming your track selection(s), the digital display
window will show the number of tracks that have been
programmed and their total time. To begin playing
your programmed selections, simply press the
X
button. Pressing
will only suspend the playing of the
programmed selection. Pressing
a second time will
clear your program selection from the
750D’s
memory.
As well, opening the top drawer at any time will also
clear your program. After you begin creating your
program list, the LED immediately to the left of the
“Program” button will illuminate and remain on until
you clear your program from memory.
The “Display” button allows you to adjust the brightness
of the large digital display window. It also provides you
with the option of turning off the display. There are
three (3) different levels of brightness; The default is
medium.
Pressing the “Display” button once will
increase the brightness
level to highest setting. Pressing
the button a second time will decrease the brightness
to the lowest setting. Pressing the “Display” button a
third time returns the display to its default setting of
medium.
Pressing the “Repeat” button once results in the entire
disc being played again once it has reached the end of
the final track. Pressing “Repeat” a second time will
result in the track currently playing being repeated
again once it has ended. To cancel this mode, simply
press the “Repeat” button a third time or open the CD
drawer. There are two (2) LED’s located to the left of the
“Repeat” button; The top one will illuminate when the
current track is being repeated and both will illuminate
when the entire disc is being repeated. If you have
created a program of selected tracks, pressing “Repeat”
once will result in your entire program repeating itself
once it has completed its cycle; Pressing “Repeat” a
second time will result in the current track from your
program being played again once it has ended; Pressing
“Repeat” a third time will terminate the “Repeat” mode.
8
