MOON 360D CD Player
Remote Control Operation
The MOON 360D CD Player uses the ‘CRM-2’ full-function remote control (figure
3). It operates on the Philips RC-5 communication protocol and is can be used with
other Simaudio MOON components.
The ‘CRM-2’ remote uses two AA batteries (included). To install them, simply slide
the back plate off in the direction of the arrow; insert the batteries in the correct
direction and then replace the back plate.
To engage the ‘CRM-2’ remote for use with the 360D CD Player, you must first
press the button labeled CD.
The POWER button located on the upper left will switch the CD Player to either
‘Stand by’ or ‘On’ mode.
Certain buttons found on this remote control perform identical functions to their
corresponding button located on the 360D’s front panel. Please refer to page 8 for
a more detailed description of the “RANDOM”, “REPEAT”, “PROG” and “TIME”
buttons.
0 thru 9 Direct access track number selection
OPEN/CLOSE Open/Close the Compact Disc drawer
DISPLAY Turns the front panel display on and off
TIME Changes the time display mode on front panel
(refer to TIME button on page 8 for more details)
◄
INPUT
►
To switch from listening to the disc loaded in the player to
an external digital source connected to the player
Stop playing the CD’s current track
Pauses the player
X
Play the compact disc loaded into the player
Press Once: Go back to the previous track on the disc
Press and hold: Scan backward through current track
Press Once: Skip to the next track on the disc
Press and hold: Scan forward through current track
Figure 3: CRM-2 Remote Control
___________________________________________________________________________
Remote Control Operation
11
