moon 260D Neo Series Owner'S Manual Download Page 7

Owner’s Manual 

 

 

Unpacking 

 

The 

Nēo 260D 

CD Transport should be removed from its box with care.   

 
The following accessories should be included inside the box with your CD Transport: 
 
 

9

   AC  power cable 

9

   ‘CRM-2’ remote control with two ‘AA’ batteries 

9

   ‘SimLink™’ cable with 1/8” mini plug terminations on each end 

9

   This owner’s manual 

9

   Warranty and product registration information     (USA and Canada only) 

 

 

Once the 

Nēo 260D

 is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We 

suggest that you keep all of the original packaging, storing it in a safe, dry place in case you’re required to 
transport this product. The customized packaging is specially designed to protect the 

260D 

from any potential 

damage during transit. 

 
 
 
Please write the serial number of your new 

Nēo 260D

 in the space provided below for future reference. 

 
 
 

Serial Number

 

 

 

 

Installation & Placement 

 
The 

Nēo 260D

 requires only minimal ventilation to 

maintain an optimum and consistent operating 
temperature. However, you should avoid placing it near 
a heat source as this could compromise the CD 
Transport’s performance and reliability. As well, it 
should be placed on a solid level surface. The 

260D

 uses 

a toroidal transformer; even though it is well shielded, 
you should not place the CD Transport too close to 
source components sensitive  to  EMI,  such  as  a 
turntables. 

 

Compact discs are easily damaged, and must be kept 
very clean. Always store them in their cases. Dirty or 
finger-marked discs will reproduce music poorly. 
Moreover, the transport may even mute parts of a track, 
or be unable to find some tracks. If you need to clean a 
CD remember to use a soft lint-free cloth, using a radial 

action (i.e. starting from the center and aiming towards 
the edges). Do not attempt to clean a compact disc 
using a rotating motion. 

 

If you intend to use the Nēo 260D’s USB input 
connection with a Windows-based computer, 
you will need to install our USB HD driver, which 
can be downloaded from the support section of 
our website

 

 

Note:  Apple-based computers don’t require this 
driver.

 

 

Summary of Contents for 260D Neo Series

















Reviews: