Advanced Setting Functions
To further customize your device let’s go through the rest of your device settings.
•
Pressing in Menu 3 times from the main screen will get you to the PCM Filter Selection. These Options affect the roll off of your audio, essentially
this will mostly effect how the top end sounds to you.
•
There is a Graph found in the manual to show you the roll off curve of each, or you could put on a song you like and try listening to it with the
different PCM options to find which one you like the best.
•
Pressing in the menu button 4 times from the main screen gets you to the DSD BW options. Just set this to Auto.
•
Pressing in menu 5 times from the main screen gets you to the more in depth menu. This screen says press the “Knob” in to enter an additional settings menu.
•
Quick note- I am using the Element X’s menu for reference, the P, M, and I will not necessarily have all of these options!
Here is each option in order:
1. Line out Mode- Gives you an options of 0db or 10dB adjustments. Just
use 0 unless using very quiet active speakers.
2. PCM Filer- covered previously, can be accessed here as well.
3. DSD- Same as PCM
4. Headphone Gain, 2 options Low (the Default) and High. Low for Low
Impedance headphones, high for high impedance headphones.
5. Dither turn and leave on (improves sound)
6. Jitter Eliminator- Improves audio quality (Leave on)
7. DPLL Bandwidth- leave on normal
8. I squared S - LVDS Port Definition- if using with Matrix Audio or PS
Audio source make sure this is set on Type A (the default). Other sources
might use options B-D
9. Dimmer- changes if the screen will dim after not using for awhile.
Change to your own preference.
10. Auto sleep- Turns unit off after more than 5 minutes of not using the
unit. Turn it off if you want the unit to stay on when not in use.
11. User Defined Button. Changes what button below the menu button
does. You can set it to change through inputs, outputs, filters, and show
device info.
12. Network Type- Change between Wifi and LAN
13. Remote Control- Use to set up more than one remote with your unit
14. Load Default- Return everything to system defaults.
15. Product Information- Press the knob in on the option to scroll through
hardware and software details.
If you need any more information you can check out the Matrix Audio manuals found on Matrix-Digi.com or the contact us page on moon-audio.com
