Using the Mojo 2 with the Poly
it did with the original Mojo. No other updates are needed.
Installing GoFigure and Updating Firmware
1. Navigate to your device’s App Store and search for GoFigure by Chord.
2. Find the GoFigure App and install it.
3. Once installation is complete, open the app.
4. Make sure your 2go/Poly is powered on and connected to the same network as this device.
5. Click on Set-Up your device in the app.
6. It will scan for local devices.
a. If your device does not show up, check your internet connection. Make sure your device is close to the streamer, and
then pull down on the screen to search for devices again.
7. Click on the device to set up and the app will walk you through the setup process.
8. Once you are in the main menu, find the settings “gear” icon and tap on it.
9. In this settings menu, find “Firmware Update.”
a. If a firmware update is available, apply it. If there are any issues with updating the firmware, keep trying. It can
sometimes already be applied but still show that the update is available before refreshing the screen.
b. Make sure your device is plugged into power when applying the update so there isn’t any possibility of it running out
of power mid-update.
10. Close the GoFigure app and then restart. Check the firmware update section again. The firmware should now show as
up to date!
