Max For Live Device - How To
Moog Theremini
Max For Live Device - How To:
Moog Theremini
Introduction
The Moog Theremini is typically operated
using each hand to independently control the
pitch and velocity parameters as shown in the
diagram.
The Theremini will function as a USB-MIDI
device. However, the pitch and velocity data
is transmitted as CC messages rather than
the conventional Note On/Note Off messages.
Therefore it will not initially respond as a
typical MIDI controller (such as a keyboard)
when connected to a DAW.
To provide this functionality within Ableton Live, OmniMusic have developed a
Max for Live Device which converts the CC messages into Note On/Note Off.
This tutorial will guide you through its setup and use. This guide is written for
users with a basic familiarity of the Ableton Live software.
Theremini Setup
Press and hold the <SETUP> button to begin configuring the Theremini.
Calibration
First, calibrate the sensors to maximise the usable range of the Theremini.
Press <SETUP> and <ROOT> together and follow the instructions on the
display.
Calibration should be completed each time the Theremini is used.
1
Pitch
Velocity
Theremini controls
