New SUB 37 SynthSound Pack
New SUB 37 SynthSound Pack
System requirements
System requirements
To install the “ Massive Leads ”, you'll need:
To install the “ Massive Leads ”, you'll need:
●
●
SUB 37 firmware1.1.13 or later
SUB 37 firmware1.1.13 or later
●
●
32 free slots
32 free slots
To load the libraries into memory you'll need:
To load the libraries into memory you'll need:
●
●
Sysex Program ( MIDI OX, Send SX, etc... )
Sysex Program ( MIDI OX, Send SX, etc... )
●
●
USB Cable (A / B ) or Midi 5 pin cable
USB Cable (A / B ) or Midi 5 pin cable
Preparations before installing
Preparations before installing
To install the “ Massive Leads”, you'll need SUB 37 system version 1.1.13 or later, and at
To install the “ Massive Leads”, you'll need SUB 37 system version 1.1.13 or later, and at
least 32 slots of free space on your synth ( See the Sub_37_Update_Instructions.pdf for
least 32 slots of free space on your synth ( See the Sub_37_Update_Instructions.pdf for
manual firmware update instructions ).
manual firmware update instructions ).
When you send a preset message via sysex, the preset is loaded into your SUB 37 buffer
When you send a preset message via sysex, the preset is loaded into your SUB 37 buffer
data ( temporary memory ) and it can be played immediately.
data ( temporary memory ) and it can be played immediately.
If you press any preset button or power off the synth before saving it, the preset will be
If you press any preset button or power off the synth before saving it, the preset will be
erased from the buffer.
erased from the buffer.
You will need to load it again in order to play it.
You will need to load it again in order to play it.
If you want to save these presets in a SUB 37 memory location use the “SAVE” hardware
If you want to save these presets in a SUB 37 memory location use the “SAVE” hardware
buttons and proceed to a manual saving as soon as you send the Sysex from your
buttons and proceed to a manual saving as soon as you send the Sysex from your
computer.
computer.
3
3
