4 Power Stage
Chapter overview
Pictogram
Navigation
►Project tree ►Drive Settings ►Power stage
Brief description
This chapter describes the configuration options for the power
stage (power supply, switching frequency, power failure
bridging).
Contents
MOOG
ID
No.:
CB40859-001
Date:
02/2018
MSD Servo Drive - Device Help
25
4 Power Stage
4.1 Power stage settings
Fig. 4.1: AC device “Power stage configuration” screen
The power stages of the servo drive can be operated with different voltages and
switching frequencies. The list boxes in the dialog box are used to adapt the power
stage to the application conditions.
NOTE
Any changes to parameters must be saved in the device.
The setting is only applied on the device after a power off/on
cycle.
If the power stage parameters are changed, the rated currents,
overload values and brake chopper thresholds may also change.
