background image

VCA

The Voltage Controlled Amplifier allows the audio level of Minitaur to be controlled from different modulation 
sources. In addition to the VCA Envelope Generator, MIDI Note Velocity can affect the VCA level. 

Page 15

UNDER THE HOOD
VCA PARAMETERS:

VEL SENS

The  Velocity  Sensitivity  (VEL  SENS) 
knob controls how much the VCA level 
will be affected by the velocity at which 
the keys are played

KB RESPONSE

As  a  monophonic  instrument,  the  Minitaur  can  only  express  one  note  at  a  time.  By  adjusting  the  Keyboard 
Response, the Minitaur can create expressive trills, plus respond to different playing techniques and styles.

KEY PRIORITY:

LOW NOTE

The Lowest note played takes priori-
ty over all other notes.

HIGH NOTE

The Highest note played takes prior-
ity over all other notes.

LAST NOTE

The most recent note played takes 
priority over all other notes.

PITCH BEND

While many MIDI controllers are equipped with Pitch Bend Wheels, there is no set amount of bend that any wheel 
can provide. The Minitaur allows a maximum pitch change range to be set for both the Up and Down directions of 
the Pitch Bend Wheel.

UNDER THE HOOD
PITCH BEND PARAMETERS:

UP RANGE

Sets the maximum value (in half-steps) 
for Pitch Bend in the Up direction.

DOWN RANGE

Sets the maximum value (in half-steps) 
for Pitch Bend in the Down direction.

16

Summary of Contents for Minitaur






















Reviews: