3
KEYBOARD OCTAVE TRANSPOSITION
•
Press the EDIT key twice to access the transpose menu.
•
Display will read -2 -1 Null +1 +2
Note: NULL is the Voyager’s Default setting.
•
Push the +/-1 buttons to shift octave to the desired location. For example,
if you would like to set your keyboard up 2 octaves, press the +1 twice.
Note: The Envelope Gate must be set to Keyboard for this feature to be
utilized. When the power is turned off to the Voyager the octa ve transpose
feature is reset to the default setting.
III. MASTER MODE
Menu page numbering scheme:
1.1
MIDI Run. Status
2.1 MIDI Mod Wheel
1.1 MIDI RUN. STATUS
MIDI Running Status is used to reduce the MIDI data sent when a number of
MIDI messages with the same Status Byte are sent. Running status eliminates the
Status Byte. Some MIDI devices can handle Running Status, and some can’t, so
you have an option of turning this on or off. To use, select “Midi Running Status”
and press ENTER. The Screen will prompt “Switch on MIDI Running Status?
Yes/No”. To turn it on, use the Cursor button to select “Yes” and press ENTER. To
turn it off use the Cursor button to select “No” and press ENTER.
2.1 MIDI MOD WHEEL
This feature allows you to select transmission of 7 or 14 bit MIDI CC messages
from the Mod Wheel. To access this function, select MIDI Mod Wheel from the
Master Mode menu with +/-1 buttons and press ENTER. Use +/-1 to change
desired setting to either 7 bit or 14 bit resolution. Only CC1 is sent choosing 7 bit.
With 14 bit, both CC1 (Most Significant Byte (MSB)) and C33 (Least Significant
Byte (LSB) are sent.
www.moogmusic.com
Prepared 7/14/05 –
2005 Moog Music Inc. All Rights Reserved.
Specifications subject to change without notice.