Global Parameters
Group 10
Group Select
Key
Parameter
Select Key
Sync Enable
Button Blinks
10.1 Load Default Settings
A#3
C#0
10 x / 1 x
This function resets all the global parameters to their default values. Hold the highest black key, and while holding it press the
lowest black key. You will see the three buttons on the LHC blink rapidly for a moment to confirm that the reset happened.
Resetting the global parameters also exits Global Edit mode.
10.2 Show Firmware Version
A#3
D#0
10 x / 2 x
This function indicates the currently-installed firmware version, using the lights on the
LHC
buttons. Hold the highest black key,
and while holding it press the next-to-lowest black key (
D# 0
). Count the number of times the
PLAY
,
HOLD
, and
TAP
buttons
blink on/off to read the version number. PLAY = major version number, HOLD = minor version number, TAP = minuscule/bugfix
version number. Example: this version, v1.2.0:
PLAY
button blinks one time, then
HOLD
button blinks two times, then
TAP
button blinks zero times (does not light at all).
V1.2.0 RELEASE NOTES
FUNCTIONS WITHIN THE GLOBAL EDIT MODE
This firmware version introduces a couple of useful functions which are launched from within the Global Edit system.
They are selected like other global parameters, but the functions activate immediately upon being selected, since there is
no need to set any additional parameter value for them.
