6.2 Risk of material damage to the
device
Radial jamming on the outer diameter
NOTICE!
Risk of material damage due to radial
jamming on the outer diameter.
The additional, non-calculated forces
which are generated when attaching addi-
tional components to the device can cause
bearing damage.
– Never attach additional components to
the outer diameter of the device.
Static indetermination
NOTICE!
Risk of material damage due to static
indetermination or centrifugal force.
The device is not suitable for absorbing
forces, e.g. static indetermination or centri-
fugal force.
– Only use the device in the environment
as approved by the manufacturer and
for the agreed purpose.
Static overdetermination
NOTICE!
Risk of material damage from static
overdetermination.
Static overdetermination is generated by
screwing the rotor and stator to the sur-
rounding. If no suitable measures are
taken to prevent the resultant forces, this
installation can cause the destruction of
the device.
– Only use the device in the environment
as approved by the manufacturer and
for the agreed purpose.
Incorrect pressure connection
NOTICE!
Risk of material damage due to incor-
rectly connected pressure lines.
Connections which are established incor-
rectly can cause damage or flooding on
the device, shaft seals may burst under
the pressure, penetrate through the device
and into adjacent machine compartments.
– Adhere to the markings for the connec-
tion bores on the housing and clearly
identify the connections using the infor-
mation in the drawings included with
delivery.
Rotopack • Operating instructions
19
