MSD Multi-Axis System Operation Manual DC-AC Servo Drive
45
4 Electrical installation
4.12
Option 2
Option 2 can be factory-configur
ed with various technology options. Additional or special
encoders can be evaluated here for example.
You will find all available options in the MSD O
r
dering Catalog. The
U
ser
M
anuals for
the respective options provide detailed information on commissioning.
4.9 Specification, USB interface
The service and diagnostics interface X2 is designed as a USB V1.1 interface. It is only
suitable for connecting a PC for commissioning, service and diagnostics using the
software Moog
D
rive
A
DministrAtor
5.
Technical specification
•
USB 1.1 standar
d - full speed device interface
•
Connection via commercially available
USB interface cable type A to type B
4.10 Specification, Ethernet interface
The service and diagnostic interface X3 is designed as an Ethernet interface. It is only
suitable for connecting a PC for commissioning, service and diagnostics using the
software Moog
D
rive
A
DministrAtor
5.
Technical specification
•
Transfer rate 10/100 Mbits/s BASE-T
•
Transmission profile IEEE802.3 complian
•
Connection via commercially available crosslink cable CA
T 5
4.11
Option 1
Depending on the DC-AC Servo Drive variant,
Option 1 is factory-configur
ed with various
options. Field bus options such as EtherCAT or SERCOS are available.
You will find all available options in the MSD O
r
dering Catalog. The
U
ser
M
anuals for
the respective options provide detailed information on commissioning.
moog
Id. no.: CA97554-001 0
5
/2017
