Moog Drummer From Another Mother, User Manual

Page: 10 / 44

10
CHANGING THE WAVEFORMS
Let’s change up the sound. Set the
VCO 1 WAVE
switch to the
SQUARE
wave
position and listen to how it affects the sound.
ADDING AN OSCILLATOR
Turn the
VCO 2 LEVEL
knob all the way up.
CREATING HARMONY
Turn the
VCO 2 FREQUENCY
knob to the right until it sounds in tune with
VCO 1 FREQUENCY
.
HARD SYNC
Set the
HARD SYNC
switch to
ON.
LISTENING TO HARD SYNC
Now grab the
VCO 2 FREQUENCY
knob and turn it all the way up and down
a few times. Notice that the pitch of Oscillator 2 stays directly related to the
pitch of Oscillator 1 when
HARD SYNC
is
ON
.
NOTE:
Because of the way that
HARD SYNC
works when it is
ON
, if the
Frequency of Oscillator 2 goes below the Frequency of Oscillator 1, little to no
sound will be output.
PICK A SOUND
Set the
VCO 2 FREQUENCY
knob to a place that makes a sound you like and then go to the next step.
EXPLORING THE DFAM
(Continued)