1 General Information
Warranty and liability
© Moog GmbH User Manual "D633-A Series" (CA80942-001; Version 1.0, 12/08) 4
1.5 Warranty and liability
Our General Terms and Conditions of Sale and Payment always apply. These
are made available to the buyer at the latest on conclusion of the contract.
Exclusion of warranty and
liability
Among other things, warranty and liability claims for personal injury and dam-
age to property are excluded if they are caused by one or more of the following:
• Work with and on the valves or handling of the valves by non-qualified
personnel
Chapter "2.4 Selection and qualification of personnel", page 8
• Non-intended operation
Chapter "2.1 Intended operation", page 5
• Handling not in accordance with safety requirements
Chapter "2.2 Handling in accordance with safety requirements", page 6
• Omission of the occupational safety and health measures required for the
particular application
Chapter "2.6 Occupational safety and health", page 9
• Failure to observe this user manual or the product-related hardware and
software documentation relevant to the particular application
• Failure to observe the safety standards of the manufacturer and the oper-
ator of the machine relevant to the particular application
• Failure to observe the latest versions of the relevant national and interna-
tional regulations, standards and guidelines (such as e.g., the EU Machin-
ery Directive, the regulations of the trade association and of TÜV or VDE)
in the configuration, construction and operation of the machine with all of
its installed components
• Omission of suitable safety devices for limiting the pressure at the hydrau-
lic ports
Chapter "2.8 Pressure limitation", page 10
• Failure to comply with the preconditions for satisfying the EMC protection
requirements
• Use of the valves in a state that is not technically faultless or not opera-
tionally safe
• Unauthorized or improperly performed structural modifications, repairs or
maintenance
Chapter "2.5 Structural modifications", page 8
• Failure to adhere to the inspection and maintenance instructions of the
manufacturer and the operator of machine
• Failure to adhere to all of the technical data relating to the storage, trans-
portation, mounting, removal, connection, start-up, configuration, opera-
tion, cleaning, maintenance or elimination of any faults, in particular the
ambient conditions and the data pertaining to the hydraulic fluid used
Chapter "4 Technical Data", page 25
• Improper storage, transportation, mounting, removal, connection, start-up,
configuration, operation, cleaning, maintenance, elimination of any faults
or disposal
• Use of unsuitable or defective accessories or of unsuitable or defective
spare parts
Chapter "13 Accessories and Spare Parts", page 65
• Catastrophes caused by foreign objects or force majeure
