background image

  Wall Mounting: Attach unit securely with 

(

4

)

 

3/8” or 8mm hardware 

(

not supplied

)

.

•  La pared que monta la caja de la energía es posible, 

pero el hardware no es incluido.

•  Le mur montant la boîte de puissance est possible, 

mais le matériel n'est pas inclus.

•  Die Wand, die den Energie Kasten anbringt, ist 

möglich, aber die Kleinteile sind nicht enthalten.

•  A parede que monta a caixa do poder é possível, 

mas a ferragem não é incluída.

•  La parete che monta la scatola di alimentazione è 

possibile, ma i fissaggi non sono inclusi.

  The power box may be pole mounted with 

the pole support clips.

•  Ésta es la plantilla del montaje para la caja de la 

energía.

•  C'est le calibre de support pour la boîte de puissance.
•  Dieses ist die Montageschablone für den Energie 

Kasten.

•  Este é o molde da montagem para a caixa do poder.
•  Ciò è la mascherina del montaggio per la scatola di 

alimentazione.

  The wall mount bracket must be attached 

using the gasket as shown.

•  El soporte del montaje de la pared se debe unir 

usando la junta según lo demostrado.

•  La parenthèse de bâti de mur doit être jointe utilisant 

la garniture comme montrée.

•  Der Wandeinfassung Haltewinkel muß mit der Dich-

tung angebracht werden, wie gezeigt worden.

•  O suporte da montagem da parede deve ser unido 

usando a gaxeta como mostrado.

•  La staffa del supporto della parete deve essere 

fissata per mezzo della guarnizione come indicata.

Wall Mount

Gasket

Bolts 

3/8”

3/8”

Nut and Lockwashers

Washer

  This is the assembled unit with the housing 

and conduit.

•  El soporte del montaje de la pared se debe unir 

usando la junta según lo demostrado.

•  La parenthèse de bâti de mur doit être jointe utilisant 

la garniture comme montrée.

•  Der Wandeinfassung Haltewinkel muß mit der 

Dichtung angebracht werden, wie gezeigt worden.

•  O suporte da montagem da parede deve ser unido 

usando a gaxeta como mostrado.

•  La staffa del supporto della parete deve essere fissata 

per mezzo della guarnizione come indicata.

Conduit Fitting

3

1

2

4

Summary of Contents for PB24










Reviews: