17
6.UsetheVALUEknobtoselectanampmodel.AdjusttheGAINandMSTvalueuntiltheGAINandMSTisclosetothatof
thetargetamp.Press
▼footswitch to enter continue.
7. From the TONE CAPTURE sampling page, you can press footswitch A to monitor the target amp or press footswitch B to
monitor the GE250's source amp model. Again, ensure the GAIN and MST of the source is roughly the same as that of
the target.
8. Press footswitch C to start capturing. You can play whatever you want until the bar loads completely. CAPTURE will turn
green after sampling is completed.
9. You can press footswitch A, B, or C to monitor the corresponding tone. If you are not satisfied with the sample, you can
press and hold footswitch C to delete current sample then redo STEP 4 again.
10. To save, navigate with VALUE to the . Select a slot for saving. Press SAVE to confirm saving. Then you can press
TONE CAPTURE button to activate the sample.
STEP2
<<BACK
NEXT>>
STEP4
<<BACK
DONE>>
A
TARGE
B
C
SOURCE
Monitor
Monitor
01:REALJB800
STEP3
(ChooseaAMPmodelassource)
01:REALJB800
Gain
+15
Bass
+2
PRES
-10
0
Mid
-4
MST
-10
<<BACK
NEXT>>
Notice:TheTONECAPTUREblockhasaSYNCoption.Whenitison,theampmodelwillberecalledastheSOURCE
settingwhensampling.Otherwise,theampmodelwillbasedonthecurrentpatch.
Tips:Forthebestresults,werecommendplayingtheguitarstronglywithanopenchordfirst,thenplayingthefull
rangeoftheinstrument.
