MERGE
MERGE is a special function which allows you to control multiple parameters from
any effects blocks and set the parameter value end points for both heel down and
toe down positions. This can be used in many ways, but it’s very good for blending
seamlessly between two different sounds or having advanced control over special
effects.
In this example we will show you how to control DELAY time, feedback and level
simultaneously with the EXP pedal, using the MERGE function.
Activate EXP pedal and set in the heel-down position after assigning the MERGE
function from the EXP settings menu. You must set up each parameter value one at
a time.
Open the DELAY effects block by pressing the DELAY button
Set the EXP pedal in the heel down position
Select the LEVEL parameter and set it to a value of 15
Do not press the VALUE control again yet…..
Set the EXP pedal in the toe down position
Change the LEVEL parameter value to 60.
(The box surrounding LEVEL will change colour)
You can now control LEVEL between these two set value points using the EXP pedal
Press the VALUE control to confirm and prepare to assign your next parameter
15
LEVEL
F.BACK
SUB-D
015
020
1/4
01:DIGITAL
DLY
TIME
698 ms
LEVEL
F.BACK
SUB-D
060
020
1/4
01:DIGITAL
DLY
TIME
698 ms
(Heel down)
(Toe down)
