12
13
www.DeubaXXL.de
www.DeubaXXL.de
12
13
www.deubaxxl.de
www.deubaxxl.de
Intended Use
The grinders are suitable for dry, peripheral
grinding of metals, only in dry rooms and for
occasional grinding. The workpiece is guided by
hand.
The grinders are not suitable for grinding
aluminium, magnesium or other materials
suitable for polishing. Not suitable for grinding
materials that could produce dust harmful to
health.
Use the product only for its designed purpose
of use. Manufacturer will not assume any
responsibility in case of damages cause of an
by customer on the original product will have a
warranty will be cancelled.
General Power Tool Safety Warnings
•
WARNING! Read all safety warnings and all
and/or serious injury. Save all warnings and
•
The term “power tool” in the warnings refers
to your mains operated (corded) power tool or
•
Before use, check that the power supply
corresponds to that which is stated on the
startup.
Work area safety
•
dark areas invite accidents.
•
Do not operate power tools in explosive
atmospheres, such as in the presence of
create sparks which may ignite the dust or
fumes.
•
Keep children and bystanders away while
you to lose control.
Electrical safety
•
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
will reduce risk of electric shock.
•
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
Model
DBSM004
DBSM005
DBSM006
Voltage
230V
230V
230V
Frequency
50Hz
50Hz
50Hz
Input power
250W
300W
700W
Rated output
105W S1,
120W S2 30min
105W S1,
150W S2 30min
250W S1, 300W S2 30min,
350W S2 30min
point mort vitesse
2980 U/min
2980 U/min
2980 U/min
•
Do not expose power tools to rain or wet
increase the risk of electric shock.
•
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges and
increase the risk of electric shock.
•
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
•
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
Personal safety
•
Stay alert, watch what you are doing and use
personal injury.
•
such as dust mask, non-skid safety shoes, hard
•
or carrying the tool. Carrying power tools with
tools that have the switch on invites accidents.
•
turning the power tool on. A wrench or a key
may result in personal injury.
•
•
Dress properly. Do not wear loose clothing or
jewelers. Keep your hair, clothing and gloves
away from moving parts. Loose clothes,
jewelers or long hair can be caught in moving
parts.
•
these are connected and properly used. Use of
Power tool use and care
•
Do not force the power tool. Use the correct
the rate for which it was designed.
•
Do not use the power tool if the switch does not
be controlled with the switch is dangerous and
must be repaired.
•
Disconnect the plug from the power source and/
making any adjustments, changing accessories,
tool accidentally.
•
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
•
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
power tool repaired before use.
•
Many accidents are caused by poorly
maintained power tools.
moving parts. Do not crimp the cable by using
it,e.g. strongly kink or roll with something
heavy about it.Damaged or entangled cords
•
Use the power tool, accessories and tool bits
and the work to be performed. Use of the