21
warm to prevent reduced work performance.
CAUTION:
device, disconnect it from the compressed air
1. Disconnect the device from the compressed air
supply.
2. Remove all nails.
3.
•
•
knob clockwise.
4. Load the nails as described above.
5. Connect the device with the compressed air
hose.
Too deep
Flush
Flush
Too high
by turning the cover.
Nail indicator
be loaded again. Then the device is loaded with
a strip of nails, the indicator is not visible. If the
nails are used up, the indicator will light up.
The unit should be recharged when half the red
Nail indicator
sure you are not pressing the trigger and the
device is disconnected from the compressed air
supply.
If you wish to protect the work surface from
to the retainer.
1. Disconnect the air hose from the device.
2.
www.DeubaXXL.de
Summary of Contents for 102753
Page 51: ...51 www DeubaXXL de ...
