28
EN
er, please ensure that the verti-
cal clearance between the sauna
heater upper edge and the sauna
ceiling is maintained. Please see
also the dimensions diagram for
the clearance between the lower
edge of the sauna heater and the
floor. On heaters with bases, this
clearance is maintained via the
base or pedestals of the device.
•
Floor heating in the sauna cabin
increases the surface tempera-
ture of the flooring.
•
Please see the dimensions infor-
mation for the respective sauna
heater for the clearance between
the heater protective grating or
the bench and other flammable
materials. The heater protec-
tive grating must roughly accord
with the front height of the sauna
heater.
•
Please also note the information
and instructions provided by the
cabin manufacturer.
•
Please take precautions
when cleaning components with
sharp edges.
•
Upright heaters need to be fitted
on site with elements that pre-
vent them from overturning.
•
Attention:
Pour the infusion
water only on the sauna rocks
and never anywhere else. Stan-
ding hesters need to be protected
against tilling.
•
When using your sauna in a
dry Finnish mode never add sau-
na essences or place any herbs
into the vaporizer holder for es-
sences/herbs.
Fire hazard!
•
Never add more essences
or volatile oils than advised on
the packaging. Never use alcohol
or undiluted concentrates.Cau-
tion!
Fire hazard!
•
When designing the cabin
ensure that the external exposed
glass surfaces only reach a maxi-
mum temperature of 76°C. If ne-
cessary, protective features need
to be fitted.
Summary of Contents for Edge Series
Page 2: ...2 D ...
Page 23: ...23 EN ...
