Monument Grills S1251801T, Use And Care Manual

Page: 20 / 23

7.5 Ignition instructions
Clean the remaining ash in the combustion chamber before each ignition. Then pour new
fuel into the control box, not to exceed the control box screen (about 2/3), and then put a
small amount of new fuel into the combustion chamber. The fuel is pyramid-shaped to
cover the best layer of the ignition rod 1~2. . Then place the fire plate, the oil guide plate
and the grilling net in turn, close the lid, turn on the Power button, and select the desired
mode.
The device starts to ignite. White smoke will be emitted during the ignition of the fuel, and
personnel can stay away from the operating equipment after waiting for the ignition to
complete.
It should be noted that in order to save electricity, the ignition rod will only work when the
Cook or Smoke mode is selected for the first time after power-on. In other cases, it does not
work. Therefore, if the fuel is not ignited, the power should be turned off first. Key, then turn
the Power button back on and select the appropriate mode to re-ignite.
7.6 Device shutdown
After the barbecue is over, please turn off the equipment safely:
First of all, please open the top cover of the control box, remove the excess fuel from the
box, and keep it for future use.
Then, let the equipment continue to work for 5 to 10 minutes to drain the fuel in the feeder;
Next, click the Power button to turn it off, but don't unplug the power immediately. At this
point, the cooling fan will continue to work for 5 minutes until the fuel is burned out and
extinguished.
Finally, please unplug the power supply and store the oven in a cool, ventilated place,
avoiding sun exposure and heavy rain.
Not exceeding the
filter screen
igniter