14
4.5. What to do if something goes wrong
4.5.1. Drier Does Not Work
Ensure the plug is in the socket and the power is switched on.
Check there is not a power cut
Check the fuse in the plug (Must be 13 amp)
Ensure the drum door is closed correctly.
Has the start/pause button been pressed – press it again.
Does the filter require cleaning?
Does the condenser require cleaning?
Does the water container require emptying?
4.5.2. Drying Results Unsatisfactory
Wrong programme has been selected – see section 3.3.
Filter is clogged – remove and clean the filter.
Condenser requires cleaning – remove and clean condenser.
Water container is full – remove and empty water container.
Incorrect volume of laundry has been added – follow the loading
instructions carefully before adding garments and starting the drying
cycle.
4.5.3. Drying Cycle Lasts Too Long
The load volume is too large – reduce the load volume.
The laundry was too wet – ensure laundry has been spun to remove
excess moisture.
If after the above checks there is still a fault please contact your service
provider.
