Section 1. Installation
-
This appliance must be installed by a qualified
electrician.
-
Remove all packaging, protective film and securing
tape from the appliance.
-
Position the appliance in a dry atmosphere.
-
The following dimensions are provided as a guide for
installation – your installer will carry out the
installation in accordance with the current
regulations.
-
Your electrician will connect the cooker in accordance
with the current regulations.
To install this appliance, please proceed as follows:
1.1. Positioning the Cooker
You must ensure a minimum gap of 2cm between
the back of the appliance and the rear wall to allow
for ventilation. You must ensure a minimum distance
of 70cm between the hotplate and overhanging
cupboards or a cooker hood (as shown above).
5
Summary of Contents for MTC60FS
Page 11: ...Gas Mark to F C Temperature Conversion 11 ...
Page 15: ...15 ...
