6
Section 1. Installation
A qualified installer must carry out the installation.
N.B. To ensure that your cooker hood operates efficiently the hose
length must not exceed 2m with a maximum of one bend.
This appliance can be used fully ‘vented’ via a ducting hose and external wall
vent, or in ‘re-circulation’ mode by using the charcoal filter provided.
The cooker hood should ideally be installed between 65-75cm above the
work surface/cooker hob. DO NOT INSTALL BELOW 65cm.
Install the cooker hood between two cupboards. Drill and screw on the side
boards of the cupboards (the holes≤2mm).The distance between the head of
the screw and the side board should be 5mm, and the distance between the
screw and the cooking surface should no less than 1040mm. If there is not
room enough, you can place it higher or lower.
Hang the cooker hood on the screws between the two cupboards.
