7.1 Troubleshooting continued.
FAULT
POSSIBLE CAUSE
TROUBLE-SHOOTING
l
l
The feet of your machine
Adjust the feet on your
have not been adjusted correctly.
machine and make sure it is
level. (**)
l
l
Remove the transit bolts on
Transit bolts fitted for
Your machine
vibrates.
transportation have not been
your machine. (**)
disassembled.
l
Smaller amount of laundry in
l
This will not stop operation of
the appliance.
the machine.
l
Do not put in more laundry
than the recommended amount
and settle it evenly.
l
Your machine is overloaded
with laundry or laundry is settled
unevenly.
l
l
Excessive amount of
Press on the start/pause
detergent used.
button to eliminate foam
formation, mix a spoon of
softener with half a litre of water
and pour the mixture into the
detergent drawer. After 5-10
minutes, press on start/pause
button again. In your next wash,
adjust the detergent dose
accordingly.
l
Use detergents produced
only for automatic washing
machines in your machine.
Excessive foam is
formed in the
detergent drawer.
l
Wrong detergent used.
l
l
The soiling of your laundry
Select the program
does not match the program
chosen.
appropriate for the soiling of
your laundry. (See program
table)
l
Adjust the amount of detergent
based on the amount and
contamination degree of your
laundry.
l
Load your machine with an
amount of laundry which will not
exceed the maximum laundry
capacity.
l
Amount of detergent used
was insufficient.
Unsatisfactory
washing result
l
The maximum laundry
capacity of your machine has
been exceeded.
(**) See the chapter regarding installation of your machine.
24