Section Installation
-
Remove all packaging, protective film and securing tape from
the appliance.
-
Wash the interior of the appliance with warm soapy water.
-
Position the appliance in a dry atmosphere.
-
Keep the microwave oven away from the TV, Radio or
antenna as picture disturbance or noise may occur.
- Please note that certain parts of this appliance have been
protected with a light film of oil. During initial use you may
see light smoke coming from the oven as the oil is
burnt off. This is quite normal.
-
Connect the plug to an adjacent ‘easily accessible’ 13amp
socket outlet and ensure that the appliance is not standing on
the supply
cable.
-
Never operate this oven without food or liquids inside
-
Remove the turntable and rotating ring from the packaging,
wash in warm soapy water and dry thoroughly. Fit the rotating
ring on the base of the interior and then carefully place the
turntable onto the rotating drive, ensuring that it ‘locks’ into
place.
-
The turntable and rotating ring can be removed from the
appliance and washed using warm soapy water
-
Replace the rotating ring on the base of the interior and then
carefully place the turntable onto the rotating drive, ensuring
that it ‘locks’ into place
-
This appliance is fitted with a safety door interlock. Do not
operate the appliance if either of the two interlock levers are
damaged. Please note that the appliance will fail to operate if
the door has not been closed correctly.
-
The turntable rotates whilst the appliance is operating – this
helps the food/liquids to cook/heat more evenly.
To install this appliance, please proceed as follows:
1.
5
Summary of Contents for MON-MBIC250
Page 7: ...7...
