7
Section 1. Installation
-
Remove all packaging, protective film and securing tape from
the appliance.
-
Position the appliance in a dry atmosphere.
-
The following dimensions are provided as a guide for
installation – your installer will carry out the installation in
accordance with the current regulations.
-
Your installer will connect the power cable in accordance with
the current regulations.
To install this appliance, please proceed as follows:
1.1.
Work-Surface Cut-Out
-
Cut out the work-top as shown in the drawing below, ensuring
that the actual sizes used are as per the chart below.
-
For installation and use, a minimum of 5cm must be
maintained around the cut-out.
-
The work surface must have a thickness of at least 30mm.
-
The work surface must be heat resistant.
Model
L(mm)
W(mm)
H(mm)
D(mm)
A(mm)
B(mm)
X(mm)
MON-CER60T4
590
520
52
48
560
490
50 mini
MON-CER30T2
288
520
52
48
268
＋
4
500
＋
4
50 mini
