montpellier MIN60S, Installation And Operation Instructions Manual

Page: 11 / 15

The metal casing of this appliance has been coated with a
preservative to protect it during transport and storage. This should
be removed during installation by using a non-abrasive stainless
steel cleaner. Always follow the instructions given with the cleaner
being used.
Installation - mounting
1. Mark the positions of the fixing holes on the wall using the dimensions
shown in Fig. 3.
2. Drill and plug the wall with appropriate fixings, suitable for the wall type
you are fixing the extractor on.
3. Mount the brackets and securely tighten.
4. Hang the hood on the brackets and adjust the brackets and height to
suit. The adjustment mechanism is shown on page 14, Fig 4.
5. Once the hood is levelled and square against the wall, adjust the
bottom panel as required (Fig. 5, page 14).
6. Secure the extractor to the adjacent units through the holes in the side
hanging brackets.
55
553
23.5
Adjacent Cabinet
Fig. 3
55
11