background image

EN

5

Compliance with WEEE 

Directive and Disposing of 

the Waste Product: 

This product complies with EU WEEE 

Directive (2012/19/EU). This 
product bears a 
classification symbol for 
waste electrical and 
electronic equipment 
(WEEE).This product has 
been manufactured with 

high quality parts and materials which 
can be reused and are suitable for 
recycling. Do not dispose of the waste 
product with normal domestic and 
other wastes at the end of its service 
life. Take it to the collection center for 
the recycling of electrical and 
electronic equipment. Please consult 
your local authorities to learn about 
these collection centers.

Compliance with RoHS 

Directive:

The product you have purchased 
complies with EU RoHS Directive 
(2011/65/EU). It does not contain 
harmful and prohibited materials 
specified in the Directive.

Package information

Packaging materials of the product 
are manufactured from recyclable 
materials in accordance with our 
National Environment Regulations. Do 
not dispose of the packaging materials 
together with the domestic or other 
wastes. Take them to the packaging 
material collection points designated 
by the local authorities

Electrical Requirements

Before you insert the plug into the wall 
socket make sure that the voltage and 
the frequency shown on the rating 
plate inside the appliance corresponds 
to your electricity supply.
Rating label is on the left hand side of 
fridge inner liner.
We recommend that this appliance be 
connected to the mains supply via a
suitable switched and fused socket. 
The appliance must be positioned so 
that the plug is accessible.

Should the mains lead of the appliance 
become damaged or should it need
replacing at any time, it must be 
replaced by a special purpose made 
mains lead which can only be obtained 
from a 

MONTPELLIER

 

Authorised Service 

Agent.

FITTED WITH

BS 1362 13A FUSE ALWAYS

FIT BS 1362 REPLACEMENT

CARTRIDGE FUSE

GREEN &

YELLOW

OR

GREEN

N

BLUE

OR

BLACK

L

BROWN

OR

RED

22mm.

6mm.

6mm.

6mm.

32mm.

12mm.

FUSE

CORD GRIP

WARNING: When positioning the 
appliance ensure the supply cord is not 
trapped or damaged.

Summary of Contents for MIFF700


























Reviews: